Dry Run Protection for Your Water Pump

• The sump empties while the motor is filling the overhead tank.
• The borewell water level drops in summer.
• The motor is switched on by hand when the corporation supply has not come.
• A float or probe controller fails and nobody notices the motor is still on.

• Run-time cut-off: if the tank has not filled within the maximum run time, the motor stops.
• No reading, no pump: the motor only runs on a fresh level from the tank sensor.
• An alert on your phone says the motor was stopped and why.
• The radar sensor sits above the water, so there is no probe to scale up and give a false reading.

Most dry runs happen between a sump and an overhead tank. See how the controller works for a sump and overhead tank, or choose a kit on the AquaPilot page.